- Maison
- Fils d'alimentation
- Acheter Leads
- A propos de nous
- Produits
- Nouvelles
- Honneurs
- Message
- Contacter
- Les catégories de produit
- Liens amicaux
- Maison > Fournir > Pour alimenter 20crmo combinée acier de construction 20crmo place 20crmo rondes en acier
Nom de l'information: | Pour alimenter 20crmo combinée acier de construction 20crmo place 20crmo rondes en acier |
Publié: | 2012-06-27 |
Validité: | 30 |
Caractéristiques: | 20crmo ronde spécifications du matériel de bar complet |
Quantité: | 33.00 |
Description Prix: | |
Description détaillée du produit: | 20CrMo barres rondes Grade: 20CrMo Standard: GB / T 3077-1988 Correspond à la norme: JIS G4053: 2003 ASTM A29M: 2005 ISO 683-18:1996 Unified Numbering: A30202 Les caractéristiques 20CrMo et portée Trempabilité 20CrMo caractère supérieur fragilité, très bonne soudabilité, la formation d'une petite tendance à la fissuration à froid, usinabilité et la plasticité souche bon rhume. Généralement trempé ou cémentation et de trempe état de travail de la fabrication du tuyau à haute pression dans le milieu de support non corrosif et la température de travail est inférieure à 250 ° C, contenant un mélange d'azote et d'hydrogène, et différents éléments de fixation, la plus grande perméabilité pièces en carbone, tels que les engrenages, arbres, etc 20CrMo composition chimique Carbone C: 0.17 ~ 0.24 Silicium Si: 0,17 ~ 0.37 Manganèse Mn: 0,40 ~ 0.70 Le soufre S: accepté la teneur résiduelle ≤ 0,035 Le phosphore P: accepté la teneur résiduelle ≤ 0,035 Chrome Cr: 0,80 ~ 1.10 Ni: promettre la teneur résiduelle ≤ 0,030 Le cuivre Cu: accepté la teneur résiduelle ≤ 0,030 Molybdène Mo: 0,15 ~ 0,25 Propriétés mécaniques 20CrMo: Résistance à la traction σb (MPa): ≥ 885 (90) σs d'élasticité (MPa): ≥ 685 (70) Allongement δ5 (%): ≥ 12 Réduction de ψ zone (%): ≥ 50 Energie d'impact Akv (J ): ≥ 78 Incidence ténacité valeurs alpha kv (J/cm2): ≥ 98 (10) Dureté: taille ≤ spécimen 197HB: taille de l'échantillon rugueux 15mm ● traitement thermique et de la microstructure des spécifications: Spécifications de traitement thermique: trempe 880 ℃, l'eau de refroidissement d'huile,; trempe 500 ° C, refroidi par eau, refroidi par huile. Etat à la livraison ●: à un traitement thermique (normalisation, recuit ou trempe à haute température) ou sans dépossession traitement thermique, l'état de livraison doivent être précisées dans le contrat. ● traitement thermique 20CrMo: Matériau 20CrMo appartient à un alliage d'acier bas carbone de structure, adaptée pour la cémentation, les spécifications de traitement thermique: trempe 880 ℃, eau, huile de refroidissement; trempe 500 ℃, eau, huile. ● 20CrMo dureté La trempe 20CrMo (860-880 ℃ l'eau froide ou de l'huile), plus basse température (150 - 200 ℃) trempe, dureté de HRC32 20CrMo-33 ● traitement thermique et les propriétés mécaniques: Acier Grade: 20CrMo Taille de l'échantillon vierge / mm: 15 Traitement thermique | trempe | température de chauffage / ° C trempe d'abord: 880 Traitement thermique | trempe température de chauffage / ℃ | trempe seconde: - Traitement thermique | trempe | Liquide de refroidissement: eau, huile Traitement thermique | Trempe | température de chauffage / ° C: 500 Traitement thermique | Trempe | Liquide de refroidissement: eau, huile Propriétés mécaniques | Résistance à la traction σb / MPa | ≥: 885 Propriétés mécaniques | céder point de σs / MPa | ≥ de: 685 Propriétés mécaniques | Allongement δ5 (%) | ≥: 12 Propriétés mécaniques | ψ retrait de surface (%) | ≥: 50 Propriétés mécaniques | fonction d'absorption des chocs AKV / J | ≥: 78 Livraison état dureté HBS | ≥: 197 De 20CrMo les spécifications générales Acier de construction allié 20CrMo * 10 Longueur (mm) Acier de construction allié 20CrMo * 12 Longueur (mm) 20CrMo 15 * Longueur (mm) acier de construction allié 20CrMo 16 * Longueur (mm) acier de construction allié 20CrMo 17 * Longueur (mm) acier de construction allié 20CrMo 200 * Longueur (mm) acier de construction allié 20CrMo 400 * Longueur (mm) acier de construction allié 20CrMo 450 * Longueur (mm) acier de construction allié 20CrMo 18 * Longueur (mm) acier de construction allié 20CrMo 22 * ??Longueur (mm) acier de construction allié 20CrMo 30 * Longueur (mm) acier de construction allié |
Vous êtes le 24525 visiteur
Droit d'auteur © GuangDong ICP No. 10089450, Hangzhou Yanagida Métal Materials Co., Ltd Tous droits réservés.
Support technique: ShenZhen AllWays Technologie Développement Co., Ltd.
AllSources réseau's désistement: La légitimité de l'information de l'entreprise ne s'engage pas à toute responsabilité de garantie