- Maison
- Fils d'alimentation
- Acheter Leads
- A propos de nous
- Produits
- Nouvelles
- Honneurs
- Message
- Contacter
- Les catégories de produit
- Liens amicaux
Nom de l'information: | Fourniture y40mn couper l'acier y40mn prix y40mn |
Publié: | 2012-06-27 |
Validité: | 300 |
Caractéristiques: | y40mn ronde spécifications du matériel de bar complet |
Quantité: | 25.00 |
Description Prix: | |
Description détaillée du produit: | Y40Mn haute teneur en soufre dans les aciers de décolletage de carbone libre, de meilleures performances de coupe, par rapport à 45 la vie d'outil en acier peut être augmenté quatre fois, d'améliorer l'efficacité de production de 30%, une plus grande résistance et la dureté, adapté aux exigences de traitement de haute rigide les pièces, telles que vis, tige, crémaillère et arbre cannelé. Standard GB / T 8731-1988 Composition chimique Carbone C: 0,37 ~ 0,45 Silicon Si: 0,15 ~ 0,35 Manganèse Mn: 1,20 ~ 1.55 S Soufre: 0,02 ~ 0,30 P Phosphore: ≤ 0,05 Avantage Diversité de formes et de tailles Mouler des formes de conception différente, le froid Tirez sur les différentes forme en coupe transversale, les tolérances des spécifications différentes de coupe facile de l'acier. L'angle à angle droit ou arrondi. Haute précision L'utilisation de haute qualité en carbure de mourir pour assurer la tolérance précis, l'unité. Surface lisse Avancée procédé d'extrusion à froid permet une coupe facile des produits sidérurgiques surface brillante et lisse. Propriétés mécaniques Après trempe à haute température résistance à la traction σb (MPa): (laminé à chaud) de 590 à 735; (froide état étiré) de 590 à 785 Allongement δ5 (%): (laminé à chaud) ≥ 14; (laminé à froid) ≥ 17 Réduction de la zone ψ (%): (laminé à chaud) ≥ 20 Dureté (Laminé à chaud) ≤ 207HB; (étirés à froid) 179 ~ 229HB Delivery Status Livraison à l'état laminé à chaud ou étirés à froid, l'état de livraison doivent être précisées dans le contrat. . 15 est la coupe d'acier, la précision, la découpe facile, d'améliorer considérablement la vie de l'outil, en plus de réduire le temps de traiter. Le SP composite à haute teneur en soufre, en acier de décolletage à faible silicium. Aptitude à la coupe de Y12, 30 ~ augmentation de 50% l'efficacité de production de l'acier Y12, surtout quand taraudage, robinets, a augmenté de plus du double de la durée de vie de Y12. |
Vous êtes le 24525 visiteur
Droit d'auteur © GuangDong ICP No. 10089450, Hangzhou Yanagida Métal Materials Co., Ltd Tous droits réservés.
Support technique: ShenZhen AllWays Technologie Développement Co., Ltd.
AllSources réseau's désistement: La légitimité de l'information de l'entreprise ne s'engage pas à toute responsabilité de garantie