- Maison
- Fils d'alimentation
- Acheter Leads
- A propos de nous
- Produits
- Nouvelles
- Honneurs
- Message
- Contacter
- Les catégories de produit
- Liens amicaux
- Maison > Fournir > Pour alimenter scm435 structure en acier allié scm435 l'acier rond scm435 Spécifications
Nom de l'information: | Pour alimenter scm435 structure en acier allié scm435 l'acier rond scm435 Spécifications |
Publié: | 2012-06-27 |
Validité: | 300 |
Caractéristiques: | un acier de construction scm435 chimique scm435 la scm435 ingrédients Prix |
Quantité: | 250.00 |
Description Prix: | |
Description détaillée du produit: | Alliage d'acier de structure: SCM435 Mise en ?uvre des normes: la norme JIS G4053-2003 Caractéristique Haute résistance statique, résistance aux chocs et à haute limite de fatigue, trempabilité de 40Cr élevée, résistance au fluage à haute résistance à la rupture et à haute température, à long terme température de fonctionnement jusqu'à 500 ° C; milieu froid déformation plastique soudage pauvres. Utiliser Le membre structural important utilisé pour travailler sous des charges élevées, comme l'organe de transmission du véhicule et du moteur; axe du rotor turbo-alternateur, l'arbre d'entra?nement lourde charge, de grandes pièces de section transversale Propriétés physiques Composition chimique Carbone C: 0,33 ~ 0,38 Silicon Si: 0,15 ~ 0,35 Manganèse Mn: 0,60 ~ 0.90 S Soufre: permettre la teneur résiduelle ≤ 0,030 Phosphore P: permettre la teneur résiduelle ≤ 0,030 Chrome Cr: 0,90 ~ 1,20 Ni: de permettre la teneur résiduelle de ≤ 0,25 Cu: de permettre la teneur résiduelle de ≤ 0,30 Molybdène Mo: 0,15 à 0,30 SCM435 standard Le SCM435 standard: SCM435 acier japonais standard (JIS G4053-2003), la correspondante nationale de l'acier 35CrMo SCM435 dureté La dureté HRC36 ~ 43 SCM435, HB269 ~ 341 Propriétés mécaniques Résistance à la traction σb (MPa): ≥ 985 (100) Rendement σs (MPa): ≥ 835 (85) Allongement δ5 (%): ≥ 12 Réduction de la zone ψ (%): ≥ 45 Impact énergétique Akv (J): ≥ 63 La valeur de l'alpha résilience KV (J / cm 2): ≥ 78 (8) Dureté: ≤ 229HB Taille de l'échantillon: taille de l'échantillon est de 25 mm rugueuse Traitement thermique et les caractéristiques de microstructure Spécifications de traitement thermique: trempe 850 ℃, refroidissement de l'huile; trempe 550 ° C, refroidi par eau, refroidi par huile. Etat à la livraison ●: à un traitement thermique (normalisation, recuit ou trempe à haute température) ou sans dépossession traitement thermique, l'état de livraison doivent être précisées dans le contrat. Recuit recuit recuit n ° 1 "760 ± 10 ℃, refroidissement du four à 400 ℃ air de refroidissement. HB220-230 La normalisation de la normalisation de la No.4 860 ± 10 ° C. normaliser refroidi au four. Trempé et trempe + revenu No.5 840 ± 10 ℃ trempe d'eau ou d'huile (en fonction de la complexité forme du produit) ,680-700 degrés de trempe. HB <217 Trempé et trempe trempe + n ° 6 840 ± 10 ℃ huile de trempe, puis 470 ° tempérée. HRC41-45 Trempé et trempe trempe + No.7 840 ± 10 Huile de trempe ℃, puis 480 degrés trempé. HRC35-45 Trempé et trempe + revenu No.8 850 ℃ huile de trempe, trempe à nouveau 510 degrés. HRC38-42 Trempé et trempe + revenu No.9 850 ℃ huile de trempe, trempe à nouveau 500 degrés. HRC40-43 Trempé et trempe + revenu No.10 850 ℃ huile de trempe, trempe, puis 510 ℃. HRC36-42 Trempé et trempe + revenu No.11 850 ℃ huile de trempe, puis à 560 ° C et trempé. HRC32-36 Trempé et trempe + revenu No.12 de 860 ° l'huile de trempe C, encore une fois trempe 390 degrés. HRC48-52 Communs aciers alliés SMn420, SMn433, SMn438, SMn443, SCr415, SCr420, SCr430, SCr440, SCr445, SCM415, SCM418, SCM420, SCM421, SCM425, SCM430, SCM432, SCM435, SCM440, SCM445, SCM822, SNC236, SNC415, SNC631, SNC815, SNC836, SNCM220, SNCM415, SNCM420, SNCM431, SNCM439, SNCM447, SNCM616, SNCM625, SNCM630, SNCM815, SACM645 |
Vous êtes le 24525 visiteur
Droit d'auteur © GuangDong ICP No. 10089450, Hangzhou Yanagida Métal Materials Co., Ltd Tous droits réservés.
Support technique: ShenZhen AllWays Technologie Développement Co., Ltd.
AllSources réseau's désistement: La légitimité de l'information de l'entreprise ne s'engage pas à toute responsabilité de garantie