- Maison
- Fils d'alimentation
- Acheter Leads
- A propos de nous
- Produits
- Nouvelles
- Honneurs
- Message
- Contacter
- Les catégories de produit
- Liens amicaux
- Maison > Fournir > Pour alimenter scm420 Tout l'acier de construction scm420 spécifications scm420 acier rond
Nom de l'information: | Pour alimenter scm420 Tout l'acier de construction scm420 spécifications scm420 acier rond |
Publié: | 2012-06-27 |
Validité: | 300 |
Caractéristiques: | scm420 le prix scm420 origine scm420 composition chimique |
Quantité: | 254.00 |
Description Prix: | |
Description détaillée du produit: | SCM420 Mise en ?uvre des normes: la norme JIS G4053-2003 Les grades correspondants nationaux: 20CrMo Correspondant grades allemands: 25CrMo4 (1.7218) ● Caractéristiques et portée: SCM420 trempabilité en alliage d'acier structurel élevé, fragilité de revenu, très bonne soudabilité, formant une petite tendance à la fissuration à froid, usinabilité et la plasticité souche bon rhume. SCM420 Généralement trempé ou cémentation et de trempe état de travail de la fabrication du tuyau à haute pression dans le milieu de support non corrosif et la température de travail est inférieure à 250 ° C, contenant un mélange d'azote et d'hydrogène, et différents éléments de fixation, la plus grande perméabilité pièces en carbone, tels que les engrenages, arbres, etc ● Composition chimique: Carbone C: 0.18 ~ 0.23 Silicon Si: 0,15 ~ 0,35 Manganèse Mn: 0,60 ~ 0.90 S Soufre: permettre la teneur résiduelle ≤ 0,030 Phosphore P: permettre la teneur résiduelle ≤ 0,030 Chrome Cr: 0,90 ~ 1,20 Ni: de permettre la teneur résiduelle de ≤ 0,25 Cu: pour permettre la teneur résiduelle ≤ 0,030 Molybdène Mo: 0,15 ~ 0,25 ● propriétés mécaniques: Résistance à la traction σb (MPa): ≥ 885 (90) Rendement σs (MPa): ≥ 685 (70) Allongement δ5 (%): ≥ 12 Réduction de la zone ψ (%): ≥ 50 Impact énergétique Akv (J): ≥ 78 La valeur de l'alpha résilience KV (J / cm 2): ≥ 98 (10) Dureté: ≤ 197HB Taille de l'échantillon: échantillon blanc dimensions de 15mm ● Le traitement thermique et les caractéristiques de microstructure: Spécifications de traitement thermique: trempe 880 ℃, l'eau de refroidissement d'huile,; trempe 500 ° C, refroidi par eau, refroidi par huile. Etat à la livraison ●: à un traitement thermique (normalisation, recuit ou trempe à haute température) ou sans dépossession traitement thermique, l'état de livraison doivent être précisées dans le contrat. |
Vous êtes le 24525 visiteur
Droit d'auteur © GuangDong ICP No. 10089450, Hangzhou Yanagida Métal Materials Co., Ltd Tous droits réservés.
Support technique: ShenZhen AllWays Technologie Développement Co., Ltd.
AllSources réseau's désistement: La légitimité de l'information de l'entreprise ne s'engage pas à toute responsabilité de garantie