- Maison
- Fils d'alimentation
- Acheter Leads
- A propos de nous
- Produits
- Nouvelles
- Honneurs
- Message
- Contacter
- Les catégories de produit
- Liens amicaux
- Maison > Fournir > Fourniture 0cr18ni10ti inoxydable 0cr18ni10ti rondes en acier Spécifications 0cr18ni10ti
Nom de l'information: | Fourniture 0cr18ni10ti inoxydable 0cr18ni10ti rondes en acier Spécifications 0cr18ni10ti |
Publié: | 2012-06-27 |
Validité: | 300 |
Caractéristiques: | Spécifications complètes place 0cr18ni10ti |
Quantité: | 5620.00 |
Description Prix: | |
Description détaillée du produit: | Standard GB / T 1220-1992 Brève introduction 0Cr18Ni10Ti (GB / T 1220-1992) 304 acier pour ajouter des éléments Ti pour éviter la corrosion intergranulaire, approprié pour être utilisé à une température de 430 ~ 900 ℃ ℃. Applications dans les avions, tuyaux d'échappement, le ballon de chaudière. 1Cr18Ni9Ti 0Cr18Ni10Ti maintenant progressivement remplacés. Les deux matériaux de composition chimique différente, des performances différentes: teneur en carbone 1Cr18Ni9Ti plus élevée que la bonne 1Cr18Ni9Ti, non seulement parce qu'il contenant du titane, et le contenu en carbone de faible 0Cr18Ni10Ti la résistance à la corrosion intergranulaire, une double assurance, le chrome . Mais tant résistance à haute température d'oxydation, c'est le contraire. 321: grades correspondant 0Cr18Ni10Ti Composition chimique Carbone C: ≤ 0,08 Silicium Si: ≤ 1,00 Manganèse Mn: ≤ 2,00 S en soufre: ≤ 0,030 Phosphore P: ≤ 0,035 Chrome Cr: 17.00 ~ 19.00 Nickel Ni: 9,00 ~ 12.00 Titane Ti: =% 5C Propriétés mécaniques Résistance à la traction σb (MPa): ≥ 520 Conditions σ0.2 limite d'élasticité (MPa): ≥ 205 Allongement δ5 (%): ≥ 40 Réduction de la zone ψ (%): ≥ 50 Dureté: ≤ Moins de 187HB; ≤ ≤ 200HV 90HRB; Traitement thermique Spécifications de traitement thermique 1) 920 solution solide ~ 1150 ℃ refroidissement rapide; 2) Selon le c?té de la demande, la demande peut être un traitement stabilisateur, la température de traitement thermique de 850 à 930 ℃, mais doit être spécifié dans le contrat. Microstructure S'organiser pour le type austénitique. Delivery Status L'administration du traitement généralement la chaleur, les types de traitement spécifiés dans le contrat; pas indiqué, par pas de livraison le traitement thermique. La 0Cr18Ni10Ti GB, ajoute 304 éléments Ti acier pour empêcher la corrosion intergranulaire; approprié pour une utilisation sous une température de 430 ~ 900 ℃ ℃, utilisée dans les aéronefs, les tuyaux d'échappement tambour chaudière, |
Vous êtes le 24525 visiteur
Droit d'auteur © GuangDong ICP No. 10089450, Hangzhou Yanagida Métal Materials Co., Ltd Tous droits réservés.
Support technique: ShenZhen AllWays Technologie Développement Co., Ltd.
AllSources réseau's désistement: La légitimité de l'information de l'entreprise ne s'engage pas à toute responsabilité de garantie